In the operation, how to better use mechanical equipment to play a role, the first thing is to fully understand the operating principle of mechanical equipment.

In the operation, how to better use mechanical equipment to play a role, the first thing is to fully understand the operating principle of mechanical equipment.

1, the material by the feeding mechanism (pneumatic gate) to participate in the weighing bucket;

2. After the controller receives the component signal of the sensor, it operates according to the preset program value;

3, at the beginning of fast (fast add, add, slow add together) feed;

4, when the component ≥ (target value - coarse measurement value), stop the fast signal output, into the medium speed (add, slow add together) feed;

5, when the component ≥ (target value - precision measurement value), stop the signal output, enter the slow speed (slow increase) feed;

6, when the component ≥ (target value - overimpulse value), stop the slow signal output, the feeding door is completely closed, and the fixed value weighing is completed.

7. After the pocket signal is input, the weighing hopper discharge door is actively opened.

When the component is less than or equal to the zero setting value, the unloading door of the weighing bucket is actively closed, the material bag is actively released into the conveyor belt, and is sent to the sewing bag of the sewing machine to enter the next process, and the manipulator enters the next control cycle.

The specific preparation process and method of granule packaging machine are as follows:

1. After the wet particles are made, they must be dry in time, otherwise they may be caked and deformed due to adhesion. Commonly used dry equipment are oven, drying room and joyfully dry bed.

2. There may be caking and adhesion after wet particles are dry. Therefore, it is necessary to select the sieve method for the dry particles to be whole and graded, in order to obtain uniform particles with a certain particle size, to ensure the accuracy of the dose division and the uniform consistency of the content.

Generally, large particles are removed through the first sieve, and then fine particles and fine powder are removed through the fourth sieve, and the fine particles and fine powder can be re-granulated or mixed with the same batch of powder again.

3, the dry particles after the whole grain should be checked for content, particle size, etc., and can be divided dose packaging after meeting the requirements. In the production, the active particle packaging machine is used for packaging.